The manufacturer of FRP walkway tells you that making platform walkway board is a purpose of FRP grating. Its main raw materials are resin, glass fiber and filler. FRP walkway has the characteristics of light weight, high strength, and easy cutting and installation. So, what tool should be used to cut the glass fiber reinforced plastic grille, and what are the matters needing attention when cutting?

The FRP walkway manufacturer tells you that although the FRP grating is easy to cut, it only needs to use a small portable electric cutting machine, but the preparation before cutting is not simple. The FRP walkway manufacturer tells you not only to meet the specific needs of the use occasion when cutting, but also to consider that there should not be too much waste. Therefore, this work must be completed by professional and technical personnel, and after the results are calculated, multiple inspections must be performed to ensure that the data is accurate.
Preparation work before cutting the walkway board of FRP inspection platform:
1. Before cutting, check whether all electric tools are in good condition and safe.
2. The FRP walkway manufacturer tells you that the staff should wear protective glasses and masks before cutting the grid plate to prevent foreign matter from splashing into the eyes and reduce the inhalation of cutting dust.
3. Cutting staff should also wear gloves and work clothes to prevent dust from entering the skin and causing allergies.
4. Choose a well-ventilated and bright place for cutting.
5. The FRP walkway manufacturer tells you that the cut surface of the grid plate needs to be coated with resin, and the resin used needs to be higher than the resin used in grid production. For example, o-phthalic grids need to coat the cut surface with isophthalic resin. , In order to prevent corrosive media from causing corrosion damage to the glass fiber inside the product.
Precautions for cutting the aisle board of FRP inspection platform:
1. Cut into whole edges or burrs: The straight-edge grille looks more tidy, has greater strength when subjected to force, and is not easy to be injured during installation; the FRP walkway manufacturer tells you that if the uneven edges are cut, it is easy to form stubble, which is When the bearing capacity is too large, the stubble will be damaged, but the better point is that it can save materials. Therefore, it is recommended to cut the whole edge to ensure the quality and aesthetics.
2. Consider the thickness of the cutting machine blade: FRP walkway tells you to pay attention to the thickness of the cutting machine blade when cutting. Usually the thickness of the blade is about 4-5mm. If the size requirements are strict, the thickness of the cutting machine blade must be considered. It is more tight and compact when laying.
3. Considering whether it is convenient to handle, transport and install: FRP walkway manufacturer tells you that the commonly used grid size is 1.22*3.66, generally cut along the 3.66 direction and 1.22 as the length, which is relatively small and convenient for packing, transportation and installation .
The above is the relevant introduction of the FRP walkway manufacturer today on what tools to use for cutting the FRP grating. I hope it can solve some of the doubts of my friends.