To install FRP cable ladder accessories, it is necessary to compile data application plans according to the standard types of description requirements, site survey records and construction plans, including straight sections, bends, bridge accessories, supports, and hangers of various standard cable trays. ladder accessories to check.

There are five main points in the FRP cable ladder accessories installation guide:
1. When the height of the set bridge is 50, 100, 6 connection holes need to be reserved at each end, and when the height is 150, 200, 12 connection holes need to be reserved at each end.​​
2. Support spacing: The support spacing should be less than or equal to the allowable load and support span of the load curve.​​
3. Bridge width: In addition to determining the width of FRP cable ladder accessories according to various data, a certain space should be reserved to ensure that there is a place for adding cables in the future.​​
4. Separated laying: When there are few power cables and control cables, they can be installed in the same bridge, but the power cables and control cables must be laid separately with a partition in the middle.
5. Cable fixing: The FRP cable ladder accessories manufacturer tells you that when the wire tray is laid horizontally, the connection between the trays should be set at 1/4 of the span as far as possible. The fixed spacing of cables running horizontally and vertically is different, 2 meters and 1.5 meters, respectively.