FRP threaded rods is a common suture material, which has the characteristics of light weight and corrosion resistance. It is widely used in many industries, such as construction industry, transportation industry, electrical engineering and communication engineering industry, which can make its market development The prospects are very broad. Although FRP threaded rods are very convenient to use, some things need to be paid attention to in order to ensure the integrity of the construction quality during installation. Today, the FRP threaded rods manufacturer will introduce to you what you need to pay attention to when installing FRP threaded rods.

1. The manufacturer of FRP threaded rods tells you to check the anchor rod, anchor cable hole arrangement form, hole distance, hole depth, angle, and whether the anchor rod components meet the requirements of the operating regulations before installation. If they do not meet the requirements, they must be dealt with and replaced.
2. The manufacturer of FRP threaded rods tells you that you should first measure the hole depth and hole straightness with the rod body to meet the specified requirements, and then put the anchoring agent of the corresponding specification according to the speed of the gel, in the order of fast and slow. Into the hole, and use the rod to slowly push the anchoring agent to the bottom of the hole; then use a mixer to stir clockwise, first stir at a constant speed for about 10-15 seconds, and when it is pushed to the fast anchoring agent, stir for 15-20 seconds and push it to the bottom of the hole , The total mixing time is 25-35 seconds.
3. The manufacturer of FRP threaded rods tells you that appropriate measures should be taken to prevent displacement and rotation of the rod body after the mixing is completed. After 5 minutes, put the nuts and trays on and tighten them with a pneumatic wrench. The pallet should be close to the rock wall, the nut installation must reach the specified torque, and the anchoring force must meet the design requirements.
The above three points are the introduction of the precautions for the installation of FRP threaded rods. I hope that it will be helpful to everyone when using FRP threaded rods to avoid unnecessary trouble.