The PU cable tray manufacturer tells you that standardized construction can ensure that the function of the cable tray is improved and the construction is stable. The standard construction of cable tray manufacturers can play a great role in ensuring the stability of construction. Cable tray wiring is suitable for places with more or more cables. The PU cable tray manufacturer tells you that when using cable trays to lay cables in corrosive or particularly humid places, corresponding protection measures should be taken according to different corrosive media. Below 1.8m.

The PU cable tray manufacturer tells you that in addition to laying in the special electrical room and outside, when the requirements cannot be met, the metal cover should be used for protection. When the cable tray is laid horizontally, the span should be selected according to the load curve for support, and the span should be 1.5m ~ 3m. When laying vertically, the distance between the fixed points should not be greater than 2m.
After the cable tray is installed, it is necessary to check whether its position is normal. Otherwise, corrections and inspections are required. So how is the position of the bridge corrected and checked?
1. After installation, make sure the bridge is in a horizontal position. The PU cable tray manufacturer tells you that if it does not meet the requirements, it should be adjusted immediately.
2. Ensure that the front and rear ends of the bridge are in a uniform straight line, and adjust immediately if they do not meet the requirements.
3. Make sure that there should be a flexible wire connection at the bridge connection, if not, it should be added immediately.
4. Make sure that the start and end points of the straight section of the bridge are fixed with angle iron. When the bridge frame exceeds a certain interval, angle steel brackets should be used for fixing.
5. Make sure that the height of the cable tray from the ground is the same. If it does not meet the requirements, adjust it immediately.
6. Make sure that the position of the parking line between the bridges meets the design requirements. If the PU cable tray manufacturer tells you that it does not meet the requirements, adjust it immediately.